Recover up to 50% of your machines’ energy

Eco’Nergy is Groupe Manu Lorraine’s hydraulic energy recovery system for excavators and material handlers – all brands, new or used.

An innovation from Lorraine

Designed, patented, installed and serviced by Groupe Manu Lorraine in Ennery, Moselle (France).

 

Performance, comfort and sustainability

Stop wasting the energy released every time your boom comes down

Eco’Nergy is a technological innovation developed by Groupe Manu Lorraine. The system recovers the potential energy produced each time the boom and attachment come down, stores it in nitrogen accumulators, and releases it again on the way up.

The result: the hydraulic pump only has to lift the payload. The machine uses less fuel, completes its cycles faster and wears less, with no change to the operator’s habits.

A universal system that fits every type of machine, from every brand:

Hydraulic excavators

Material handlers

New or used machines

%

energy savings

Why Eco’Nergy

A cost-effective system for your entire fleet

Savings and profitability

Savings
& profitability

The low cost of the system, combined with fuel savings, delivers a return on investment in around 12 to 18 months.

Lower fuel bill

Pays for itself in 12 to 18 months

Higher productivity

Operator comfort

Operator
comfort

Sudden movements are cushioned: fewer jolts and vibrations reach the cab, and precision work such as levelling becomes easier.

Less vibration

More precise levelling

Automatic regulation

Longevity and environment

Longevity
& environment

The extra power significantly reduces wear on vital components, and lower fuel consumption cuts CO₂ emissions.

Less component wear

Lower CO₂ emissions

Compatible with all brands

New or used machines, all brands: check your machine’s compatibility

Operating principle

Free energy, recovered on every cycle

On a standard machine, the pump lifts the entire boom (around 70% of the total weight) and the loaded attachment (30%) on every cycle. All the energy spent on the way down is lost.

With Eco’Nergy, this dead weight is neutralised: on the way down, oil from the bottom of the cylinders charges nitrogen accumulators. On the way up, the compressed gas releases this energy and the pump only works to lift the load. Regulation is automatic.

A question about your machine’s compatibility? Call our experts on +33 3 87 73 78 78

Download
the brochure

A technological innovation

How Eco’Nergy recovers your machines’ energy

When the attachment is lowered, gravity alone is enough to bring the whole assembly down. The energy from this force can be stored and reused when the equipment is raised.

1. First cycle

On first use, or when the accumulator is discharged, the circuit works normally: the pump feeds both cylinders.

2. Lowering: energy is stored

As the equipment comes down under its own weight, oil from the bottom of the cylinder is recovered to charge the accumulator using the potential energy of the descent.

3. Raising: energy is released

When the boom is raised, the accumulator releases the energy needed to counter the weight of the boom and attachment. The hydraulic pump is then only used to lift the payload. The energy gain is considerable, comparable to that of an engine twice as powerful.

4. Automatic regulation

During normal operation, pressure is always regulated according to the work being done, the working distance and the weight of the equipment.

Eco’Nergy operating principle: lowering, storing and releasing energy
Eco’Nergy hydraulic diagram: accumulator, control valve and cylinders
Our work

Our installations in pictures

With or without Eco’Nergy

Standard machine vs. equipped machine: the difference

Standard machine

Standard machine without Eco’Nergy: the pump lifts the full weight of the boom

The power needed to lift the entire boom (70% of the total weight) and the loaded attachment (30%) leads to high fuel consumption, and energy is lost every time the boom comes down.

Machine equipped with Eco’Nergy

Machine equipped with Eco’Nergy: the dead weight is offset by the accumulator

The dead weight (boom + empty attachment, i.e. 70%) is neutralised on the way down and stored in the nitrogen accumulators. Driven by the compressed gas, they release oil according to the bucket’s workload: only the load has to be handled by the pump.

Up to 50% energy savings with Eco’Nergy

Cut your fuel consumption

The harder the machine works in terms of output and loading/unloading cycles, the greater the fuel savings. You reduce your fuel bill while limiting pollution.

At the same time, the additional flow considerably shortens your cycle times.

On video

Eco’Nergy in action

How the system works

Customer testimonial

Dealers

Eco’Nergy near you – get in touch!

Eco’Nergy is distributed and installed by the Groupe Manu Lorraine network: Manu Lorraine in Ennery (Moselle, France), Manu Alsace in Marlenheim (Bas-Rhin, France) and, in the Netherlands, Van der Spek in Vianen.

Map of Eco’Nergy dealers

Months maximum return on investment!

Depending on how the machine is used, the system pays for itself in 12 to 18 months through fuel savings.

%

Of dead weight neutralised (boom & attachments)

The weight of the boom and empty attachment, around 70% of the lifting effort, is offset by the accumulators.
Logo Manu Lorraine

Address: MANU LORRAINE
ZI Les Jonquières
1, rue Charles Picard
57365 ENNERY

Phone: (+33)3 87 73 78 78
Website: www.manulorraine.com

logo_vanderspeck

Address: Van der Spek Vianen B.V.
De Limiet 14,4131 NR Vianen (U)
Postbus 61, 4130 EB Vianen (U)
Nederland

Email: info@vanderspek.nl
Phone: (+31) 347 – 36 26 66
Website: www.vanderspek.nl

Manu_alsace_logo

Address: MANU ALSACE
2, route de Kirchheim
67520 MARLENHEIM

Phone: (+33) 3 88 40 18 17
Website: www.manualsace.com

Frequently asked questions

Everything you need to know about Eco’Nergy

ECO'nergy
What is the Eco’Nergy system?

Eco’Nergy is a hydraulic energy recovery system developed by Groupe Manu Lorraine in Ennery (Moselle, France). It stores the energy produced when the boom of an excavator or material handler comes down in nitrogen accumulators, then releases it on the way up.

How does energy recovery work?

On the way down, the equipment lowers under its own weight: oil from the bottom of the cylinders is sent to the accumulator and compresses the nitrogen. On the way up, the accumulator releases this energy to counter the weight of the boom and attachment. The hydraulic pump only supplies the effort needed for the payload.

How much energy can Eco’Nergy save?

Eco’Nergy delivers up to 50% energy savings. The gain depends on use: the more loading and unloading cycles the machine performs, the greater the fuel savings.

Which machines can be equipped?

The system fits every type of machine with a hydraulic boom, from every brand, new or used – in particular crawler and wheeled hydraulic excavators and material handlers.

What is the return on investment?

The low cost of the system, combined with fuel savings, delivers a return on investment in around 12 to 18 months, depending on how the machine is used.

Does the system change how the machine is operated?

No. Regulation is automatic and transparent for the operator: pressure adapts to the work being done, the working distance and the weight of the attachment. The system also cushions sudden movements and makes precision work such as levelling easier.

What happens when the accumulator is discharged?

On first use, or when the accumulator is discharged, the hydraulic circuit works normally: the pump feeds both cylinders. The machine therefore remains fully operational.

What are the environmental benefits?

By reducing fuel consumption, Eco’Nergy cuts CO₂ and greenhouse gas emissions from construction machinery, while limiting wear on the machine’s vital components.

Where can I buy Eco’Nergy and have it installed?

Eco’Nergy is distributed by Manu Lorraine (1 rue Charles Picard, Z.I. Les Jonquières, 57365 Ennery, France, +33 3 87 73 78 78), Manu Alsace (2 route de Kirchheim, 67520 Marlenheim, France, +33 3 88 40 18 17) and Van der Spek in Vianen, the Netherlands (+31 347 36 26 66).

Request a quote

Equip your machine with Eco’Nergy today

Tell us the make, model and use of your machine: our technicians will check its compatibility and send you a detailed quote. 

All brands

New or used

Up to 50% savings

Pays for itself in 12 to 18 months

Designed in Moselle, France

Prefer to talk? Call us on +33 3 87 73 78 78

Request a quote

Describe your machine: we will check its compatibility and get back to you quickly.

Privacy policy

Manu Lorraine – Eco’Nergy
1, rue Charles Picard, Z.I. Les Jonquières, 57365 Ennery, France
+33 3 87 73 78 78

Copyright © 2017-2026 Eco’Nergy. All rights reserved | Powered by CONSELIO S.A. | Legal notice

Eco’Nergy
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.